Configure capacity buffers

Standard Autopilot

Capacity buffers improve the responsiveness and reliability of critical workloads by proactively managing spare cluster capacity and suspended states of pre-provisioned, pre-configured capacity by using a Kubernetes CapacityBuffer CustomResourceDefinition (CRD). Using capacity buffers lets you explicitly define a specific amount of unused node capacity within your cluster. This reserved capacity helps to reduce Pod scheduling time.

When a high-priority workload needs to scale up quickly, the new workload can use the empty capacity immediately without waiting for node provisioning. This approach minimizes latency and avoids resource contention during sudden spikes in demand.

This page provides methods for configuring capacity buffers: a fixed replicas buffer, a resource limits buffer, and a percentage-based buffer.

Before you begin

Before you start, make sure that you have performed the following tasks:

Enable the Google Kubernetes Engine API.

Enable Google Kubernetes Engine API

If you want to use the Google Cloud CLI for this task, install and then initialize the gcloud CLI. If you previously installed the gcloud CLI, get the latest version by running the gcloud components update command. Earlier gcloud CLI versions might not support running the commands in this document.
Note: For existing gcloud CLI installations, make sure to set the compute/region property. If you use primarily zonal clusters, set the compute/zone instead. By setting a default location, you can avoid errors in the gcloud CLI like the following: One of [--zone, --region] must be supplied: Please specify location. You might need to specify the location in certain commands if the location of your cluster differs from the default that you set.

Create, or have access to, a GKE cluster on version 1.35.2-gke.1842000 for active buffers, and version 1.36.0-gke.2253000 or later for standby buffers.
Enable node auto-provisioning on your Standard clusters. In Autopilot clusters, node auto-provisioning is already enabled. Node auto-provisioning is optional but recommended for active buffers and required for standby buffers.

Create prerequisite Kubernetes objects

To configure a CapacityBuffer, you need a namespace that holds all of the required objects (the CapacityBuffer itself, and additional resources like a PodTemplate or workload). The PodTemplate and CapacityBuffer must be in the same namespace. You can create a namespace or use an existing namespace, including the default namespace.

Depending on which type of CapacityBuffer you're configuring, you also require one of the following:

PodTemplate: defines the resource requirements for a single unit of buffer capacity. The configuration specified in the CapacityBuffer object references the Pod template.
Workload: an existing workload that you reference in the CapacityBuffer object. This guide uses a Deployment object as an example workload, but capacity buffers support any of the following resource types:
- Deployment
- ReplicaSet
- StatefulSet
- ReplicationController
- Job
- CustomResourceDefinitions (CRDs) that implement the scale subresource.
  
  Note: If you are using a custom CRD, you might need to manually grant the cluster autoscaler permissions to read the scale subresource. See Permission errors for custom scalable resources.

This section provides examples of these objects. If you already have a workload that you want to configure with a capacity buffer, proceed to Apply a capacity buffer.

To create an example Kubernetes workload, complete the following steps:

Save the following manifest as namespace.yaml:

apiVersion: v1
kind: Namespace
metadata:
  name: capacity-buffer-example
  labels:
    name: capacity-buffer-example

This manifest creates a namespace called capacity-buffer-example.

Optional: to use capacity buffers with a custom ComputeClass, save the following manifest as custom-compute-class.yaml:

apiVersion: cloud.google.com/v1
kind: ComputeClass
metadata:
  name: ccc-example
  namespace: capacity-buffer-example
spec:
  # Buffers are also created according to these priorities
  priorities:
  - machineFamily: n4
  - machineFamily: n4d
  - machineFamily: c4
  - machineFamily: c4d
  nodePoolAutoCreation:
    enabled: true

This manifest creates a custom ComputeClass that defines and controls the compute priorities for the nodes that GKE provisions. To learn more, see custom ComputeClasses.

Save the following manifest as buffer-pod-template.yaml:

apiVersion: v1
kind: PodTemplate
metadata:
  name: buffer-unit-template
  namespace: capacity-buffer-example # the namespace must be the same namespace as the CapacityBuffer
template:
  spec:
    terminationGracePeriodSeconds: 0
    containers:
    - name: buffer-container
      image: registry.k8s.io/pause:3.9
      resources:
        requests:
          cpu: "1"
          memory: "1Gi"
        limits:
          cpu: "1"
          memory: "1Gi"
    # Optional: Using buffers with a custom ComputeClass /
    # controls the properties of the provisioned nodes.
    nodeSelector:
      cloud.google.com/compute-class: ccc-example

This manifest creates a PodTemplate that defines the resource requirements for a single unit of buffer capacity (1 CPU and 1Gi Memory). This configuration specifies the size of capacity units that GKE provisions for the buffer. For example, with this PodTemplate, GKE won't consider nodes with less than 1 CPU and 1Gi of available resources as part of the buffer, if the cluster scales up.

Save the following manifest as sample-workload-deployment.yaml:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: critical-workload-ref
  namespace: capacity-buffer-example # the namespace must be the same namespace as the CapacityBuffer
spec:
  replicas: 10
  selector:
    matchLabels:
      app: critical-workload
  template:
    metadata:
      labels:
        app: critical-workload
    spec:
      containers:
      - name: busybox
        image: busybox
        command: ["sleep", "3600"]
        resources:
          requests:
            cpu: 100m
      # Optional: Using buffers with a custom ComputeClass /
      # controls the properties of the provisioned nodes.
      nodeSelector:
        cloud.google.com/compute-class: ccc-example

This manifest creates a sample Deployment with 10 replicas, which is the reference object for the percentage-based buffer example in the next section.

Apply the manifests to your cluster:

kubectl apply -f namespace.yaml -f custom-compute-class.yaml -f buffer-pod-template.yaml -f sample-workload-deployment.yaml

Verify that GKE created the objects:

kubectl get podtemplate -n capacity-buffer-example
kubectl get deployment critical-workload-ref -n capacity-buffer-example

The output is similar to the following:

NAME                   AGE
buffer-unit-template   1m

NAME                    READY   UP-TO-DATE   AVAILABLE   AGE
critical-workload-ref   10/10   10           10          1m

Apply a capacity buffer

This section provides examples of the different types of capacity buffers that you can apply to your workloads.

Configure a fixed replicas buffer

Configuring a CapacityBuffer with fixed replicas specifies the exact number of buffer units that you want based on a PodTemplate.

To create a buffer with fixed replicas, complete the following steps:

Save the following manifest as cb-fixed-replicas.yaml:
```
apiVersion: autoscaling.x-k8s.io/v1beta1
kind: CapacityBuffer
metadata:
  name: fixed-replica-buffer
  namespace: NAMESPACE
spec:
  podTemplateRef:
    name: POD_TEMPLATE
  replicas: 3
  provisioningStrategy: "STRATEGY"
```
Replace the following:
- NAMESPACE: the name of your namespace, for example capacity-buffer-example.
- POD_TEMPLATE: the PodTemplate that defines your resource requirements, for example buffer-unit-template.
- STRATEGY: the provisioning strategy, either "buffer.x-k8s.io/active-capacity" (default) or "buffer.gke.io/standby-capacity".
This manifest creates a CapacityBuffer resource that references a PodTemplate to request a specific number of buffer units.

Apply the manifest:

kubectl apply -f cb-fixed-replicas.yaml

Confirm that GKE applied the capacity buffer:
```
kubectl get capacitybuffer fixed-replica-buffer -n NAMESPACE
```
The replicas field in the status should show 3, which reflects the number of replicas that you defined in the manifest. The STATUS field should show ReadyForProvisioning.

Configure a resource limits buffer

You can use the limits field to define a maximum amount of resources that the buffer should consume, calculated based on your PodTemplate size.

To create a resource limits buffer, complete the following steps:

Save the following manifest as cb-resource-limits.yaml:
```
apiVersion: autoscaling.x-k8s.io/v1beta1
kind: CapacityBuffer
metadata:
  name: resource-limit-buffer
  namespace: NAMESPACE
spec:
  podTemplateRef:
    name: POD_TEMPLATE
  limits:
    cpu: "5"
    memory: "5Gi"
  provisioningStrategy: "STRATEGY"
```
Replace the following:
- NAMESPACE: the name of your namespace, for example capacity-buffer-example.
- POD_TEMPLATE: the PodTemplate that defines your resource requirements, for example buffer-unit-template.
- STRATEGY: the provisioning strategy, either "buffer.x-k8s.io/active-capacity" (default) or "buffer.gke.io/standby-capacity".
This manifest creates a CapacityBuffer resource with a total limit of 5 CPUs and 5 GiB Memory. If you're using the PodTemplate example from the previous step, you define each unit as 1 CPU and 1Gi Memory, which should result in 5 buffer units.

Apply the manifest:

kubectl apply -f cb-resource-limits.yaml

Confirm that GKE applied the capacity buffer:
```
kubectl get capacitybuffer resource-limit-buffer -n NAMESPACE
```
Check the CapacityBuffer status. The replicas field should show a value derived from the limits that you defined. If you're using the PodTemplate example from the previous section, you should see 5 buffer units because this is the maximum number of units that fit within the defined limits.

Configure a percentage-based buffer

Configuring a percentage-based buffer dynamically sizes the buffer based on a percentage of an existing scalable workload. Percentage-based capacity buffers are supported only for Kubernetes scalable objects that implement the scale subresource, such as Deployments, StatefulSets, ReplicaSets, or Jobs. You can't define a percentage-based buffer for Pod templates because they don't have a replicas field.

We generally recommend starting with fixed replicas or resource limit strategies, rather than percentage-based buffers. Percentage-based buffers are less responsive to sudden scale-ups if the workload scales to low numbers or zero, because the safety margin scales in proportion to active Pods. They are useful mainly for large deployments that never scale to very low replica counts.

To create a percentage-based buffer, complete the following steps:

Save the following manifest as cb-percentage-based.yaml:
```
apiVersion: autoscaling.x-k8s.io/v1beta1
kind: CapacityBuffer
metadata:
  name: percentage-buffer
  namespace: NAMESPACE
spec:
  scalableRef:
    apiGroup: apps
    kind: Deployment
    name: SCALABLE_RESOURCE_NAME
  percentage: 20
  provisioningStrategy: "STRATEGY"
```
Replace the following:
- NAMESPACE: the name of your namespace.
- SCALABLE_RESOURCE_NAME: the name of your scalable resource, for example critical-workload-ref.
- STRATEGY: the provisioning strategy, either "buffer.x-k8s.io/active-capacity" (default) or "buffer.gke.io/standby-capacity".
This manifest creates a CapacityBuffer resource that requests a buffer size equivalent to 20% of the referenced resource's replicas. If you're using the Deployment example from the previous section, the replica value is set to 10.

Note: You can set the value of the percentage field to greater than 100 if you require a buffer larger than the current size of the referenced workload. Non-whole buffer replica counts, resulting from percentage field values lower than 100, are rounded down.

Apply the manifest:

kubectl apply -f cb-percentage-based.yaml

Confirm that GKE applied the capacity buffer:
```
kubectl get capacitybuffer percentage-buffer -n NAMESPACE
```
Check the CapacityBuffer status. The replicas field should show a value from the percentage calculation. If you're using the Deployment example from the previous section, you should see 2 buffer units, which is 20% of the 10 replicas defined in the Deployment.
Test the dynamic scaling by manually scaling the Deployment up to 20 replicas:
```
kubectl scale deployment critical-workload-ref -n NAMESPACE --replicas=20
```
The CapacityBuffer controller reacts and automatically scales the buffer to 4 replicas.

Customize standby buffer behavior

You can use annotations to customize how standby buffers start and refresh. Add these annotations to the metadata.annotations field of your CapacityBuffer resource:

buffer.gke.io/standby-capacity-init-time: the amount of time a node remains active after creation before it's suspended. The format is a duration string (for example, 5m or 1h). The default is 5m.
buffer.gke.io/standby-capacity-refresh-frequency: how often suspended nodes are refreshed. The default is 1d.

The following example shows a manifest with these optional fields to customize the behavior of standby buffers:

apiVersion: autoscaling.x-k8s.io/v1beta1
kind: CapacityBuffer
metadata:
  name: customized-standby-buffer
  namespace: my-namespace
  annotations:
    buffer.gke.io/standby-capacity-init-time: "15m"
    buffer.gke.io/standby-capacity-refresh-frequency: "12h"
spec:
  podTemplateRef:
    name: buffer-unit-template
  replicas: 3
  provisioningStrategy: "buffer.gke.io/standby-capacity"

Preload images on standby buffers

To speed up workload startup times when a standby node resumes, you can preload container images by using a DaemonSet. The DaemonSet runs during the start-up period before the node is suspended.

To preload images by using the DaemonSet, complete the following steps:

Save the following manifest as image-puller-daemonset.yaml:

apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: image-prefetch-daemonset
  namespace: NAMESPACE
spec:
  selector:
    matchLabels:
      name: image-prefetch
  template:
    metadata:
      labels:
        name: image-prefetch
    spec:
      tolerations:
      - key: "buffer.gke.io/standby-node-suspended"
        operator: "Exists"
      initContainers:
      - name: image-puller
        image: IMAGE_NAME
        command: ["sh", "-c", "true"]
      containers:
      - name: pause
        image: registry.k8s.io/pause:3.9

Replace the following:

NAMESPACE: the namespace for the DaemonSet, for example capacity-buffer-example.
IMAGE_NAME: the name of the image to preload, for example your-app-image:latest.

Apply the DaemonSet manifest to your cluster:

kubectl apply -f image-puller-daemonset.yaml

Verify that the DaemonSet is created:

kubectl get daemonset image-prefetch-daemonset -n NAMESPACE

Verify that your capacity buffer is created and ready for provisioning:
```
kubectl get capacitybuffer CAPACITY_BUFFER_NAME -n NAMESPACE
```
Check the status. The STATUS field should show ReadyForProvisioning.

Monitor capacity buffer status and performance

You can monitor the status and health of your capacity buffers by using kubectl commands and Cloud Monitoring metrics.

Verify CapacityBuffer resource status

To check the health of your capacity buffers and verify that they are ready to receive workloads, complete the following steps:

Get the status of all capacity buffers across the cluster:
```
kubectl get capacitybuffer -A
```
Inspect the detailed status, conditions, and event logs of a specific buffer:
```
kubectl describe capacitybuffer CAPACITY_BUFFER_NAME -n NAMESPACE
```

Identify suspended standby buffer nodes

Standby buffer VMs are pre-provisioned, but kept in a suspended state to help reduce costs. You can recognize these suspended nodes because they have a custom condition. To audit suspended node instances, run the following command:

kubectl get nodes -o custom-columns='NAME:.metadata.name,SUSPENDED:.status.conditions[?(@.type=="Suspended")].status'

A status of True indicates a standby VM is suspended. A status of False or <none> indicates an active, running node.

Monitor performance with Cloud Monitoring

To help monitor the performance of capacity buffers, monitor the following resources in Cloud Monitoring:

Reaction latency (cluster_autoscaler/reaction_time_milliseconds): Tracks the duration for the Cluster Autoscaler to make a scaling decision based on your CapacityBuffer pending demand.
Cluster Autoscaler logs: Search for log entries like "Capacity pod processor injecting ..." to observe active buffer Pod replacement events.

Remove capacity buffers

If you no longer need a capacity buffer for your workloads, delete the CapacityBuffer object. This removes the placeholder Pods and allows the cluster autoscaler to scale down the nodes.

kubectl delete capacitybuffer CAPACITY_BUFFER_NAME -n NAMESPACE

Replace CAPACITY_BUFFER_NAME with the name of the CapacityBuffer that you want to delete.

Troubleshooting

The following section contains information on resolving common issues with capacity buffers.

Capacity buffer not ready due to billing model

If you create a CapacityBuffer for a workload that uses the Pod-based billing model (pay-per-Pod), the capacity buffer won't be ready for provisioning.

To identify this issue, check the CapacityBuffer status:

kubectl describe capacitybuffer BUFFER_NAME -n NAMESPACE

Look for a condition of the type ReadyForProvisioning with a status of False.

To resolve this issue, ensure that your CapacityBuffer references a workload or PodTemplate that is compatible with node-based billing.

Permission errors for custom scalable resources

If you configure a CapacityBuffer to work with custom scalable objects (using the scalableRef field), the cluster autoscaler might fail to scale the buffer if it lacks the necessary permissions.

To resolve this issue, manually grant the required permissions by creating a ClusterRole and ClusterRoleBinding, such as in the following example:

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: custom-scale-getter
rules:
- apiGroups: ["api.example.com"]
  resources: ["customreplicatedresources/scale"]
  verbs: ["get"]
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: ca-custom-scale-getter
subjects:
- kind: User
  name: "system:cluster-autoscaler"
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: custom-scale-getter

For more information about configuring RBAC, see the Kubernetes RBAC documentation.

What's next

Learn more about capacity buffers.
Refer to the CapacityBuffer CRD documentation.

Configure capacity buffers Stay organized with collections Save and categorize content based on your preferences.

Before you begin

Create prerequisite Kubernetes objects

Apply a capacity buffer

Configure a fixed replicas buffer

Configure a resource limits buffer

Configure a percentage-based buffer

Customize standby buffer behavior

Preload images on standby buffers

Monitor capacity buffer status and performance

Verify CapacityBuffer resource status

Identify suspended standby buffer nodes

Monitor performance with Cloud Monitoring

Remove capacity buffers

Troubleshooting

Capacity buffer not ready due to billing model

Permission errors for custom scalable resources

What's next

Configure capacity buffers